This accreditation, alongside our existing accreditation for lithium battery safety testing under IEC 62133-2, places Hermon Laboratories at the forefront of lithium battery safety testing. It enables importers and exporters to ensure compliance with international requirements for the safe transportation of batteries.
What is the UN38.3 Standard?
UN38.3 is a cornerstone safety standard for the transportation of lithium batteries, which are known to pose high fire and explosion risks in case of malfunction.
It outlines a series of tests designed to ensure that batteries do not pose hazards during transport. The standard applies to lithium batteries, whether they are installed in electronic devices or shipped separately, and aims to ensure they can withstand various conditions including heat, pressure, vibration, impact, and other stressors encountered during transportation.
UN38.3 Testing Procedures
The standard mandates a series of tests to ensure that the battery does not pose safety risks such as leakage, explosion, or fire. These tests include:
- Altitude Simulation: Low-pressure testing simulating battery conditions during air transport at 15,000 feet and 11.6 PSI.
- Thermal Test: Exposing the battery to extreme temperature fluctuations from -40°C to +75°C.
- Vibration Test: Simulating vibrations experienced during transportation.
- Shock Test: Simulating strong physical impacts during transit.
- External Short Circuit: Simulating an external short on the battery cell contacts or battery pack.
- Impact & Crush: Simulating physical impacts and/or crushing of the battery cell casing.
- Overcharge Test: Simulating overcharging by applying a voltage and current higher than the manufacturer’s recommendation.
- Forced Discharge: Simulating a forced discharge condition for the battery.
Who Must Comply with UN38.3?
The requirements of UN38.3 apply to all battery manufacturers and distributors of lithium batteries intended for international transport. Any lithium battery or electrical device containing such a battery must demonstrate compliance with this standard to ensure transport safety, whether by sea, air, or land. For example, the International Air Transport Association (IATA) mandates compliance with this standard for air shipment.
Risks of Transporting Lithium Batteries
Lithium batteries pose serious safety risks if not properly tested prior to shipment. Batteries that fail to meet UN38.3 standards can cause incidents such as explosions, overheating, chemical leakage, or fires during transport. Such events can damage other cargo, pose safety threats to passenger aircraft, and, in some cases, endanger passengers.
Why Choose Hermon Laboratories?
- Expertise and Experience: We are an accredited laboratory with a highly experienced team specializing in lithium battery testing to international standards.
- Full Certification: All our testing processes comply with the required standards, including IEC/EN/UL 62133-2 and UN38.3, to ensure your production processes meet international safety regulations.
- Reliable and Accurate Results: We provide trustworthy, objective results to help you deliver a safe and high-quality product to market.
- Professional Support: We offer expert guidance throughout the testing process, including detailed reports and CB certificates.
For more information about our testing services or to schedule a meeting with our expert team, please don’t hesitate to contact us through any of the usual channels.
We’re here to ensure your batteries meet all safety requirements and succeed in the market.
החל מהיום, מעבדות חרמון מוסמכות לביצוע בדיקות סוללות ליתיום לפי תקן .UN38.3 הסמכה זו, ביחד עם ההסמכה לבדיקות בטיחות לסוללות ליתיום לפי תקן IEC 62133-2, מציבה את מעבדות חרמון בחזית תחום בדיקות הבטיחות של סוללות ליתיום, ומאפשרת ליבואנים ויצואנים להבטיח עמידה בדרישות הבינלאומיות להובלה בטוחה של סוללות.
מהו תקן UN38.3?
תקן UN38.3מהווה אבן יסוד בתחום הבטיחות בהובלת ושינוע סוללות ליתיום הידועות כבעלות סיכון גבוה לשרפה ופיצוץ במקרה תקלה. הוא קובע סדרת בדיקות שמטרתן להבטיח שהסוללה לא תסכן או תגרום לנזקים במהלך השינוע. התקן חל על סוללות ליתיום, בין אם הן נמצאות במכשירים אלקטרוניים ובין אם הן נשלחות בנפרד, ומטרתו להבטיח עמידה בתנאים שונים של חום, לחץ, רעידות, מכות ותקלות במהלך השינוע.
בדיקות לפי תקן UN38.3
התקן דורש ביצוע סדרת בדיקות שמטרתן לוודא שהסוללה לא יוצרת סיכון בטיחותי כגון דליפה, פיצוץ, או שריפה. הבדיקות כוללות:
סימולציית גובה (Altitude Simulation): בדיקה בלחץ נמוך המדמה סוללה בתנאים של טיסה בגובה 15,000 רגל ולחץ של 11.6 PSI.
בדיקת טמפרטורה(Thermal Test) : בדיקה הכוללת שינויי טמפרטורה קיצוניים, מטמפרטורה של -40°C עד +75°C.
בדיקת רעידות (Vibration): בדיקה המדמה רעידות במהלך ההובלה.
בדיקת זעזוע (Shock): בדיקה המדמה מכות חזקות במהלך ההובלה.
בדיקת קצר חיצוני (External Short Circuit): בדיקה המדמה קצר חיצוני על מגעי תא סוללות או מארז סוללה.
בדיקת פגיעה / ריסוק (Impact & Crush): בדיקות המדמות פגיעות ו/או ריסוק של מעטפת תא הסוללה.
בדיקת טעינת יתר (Overcharge): בדיקה המדמה מצב של טעינת יתר של סוללה, באמצעות טעינה במתח וזרם גבוהים מהמומלץ על ידי היצרן.
בדיקת פריקת סוללה (Forced Discharge): הבדיקה מדמה מצב של פריקה מאולצת עבור סוללות.
מי נדרש לעמוד בתקני UN38.3?
דרישות של תקן UN38.3 חלות על כל חברות ייצור הסוללות או מפיצי סוללות ליתיום, מכל סוג שהוא, המיועדות להובלה ושינוע בינלאומי. כל סוללת ליתיום או מכשיר חשמלי המשלב בתוכו סוללת ליתיום, אם הוא מיועד לייצוא או הובלה דרך הים, האוויר או היבשה, חייב להוכיח עמידה בתקן זה על מנת להבטיח את הבטיחות בשינוע. לדוגמא, ארגון התעופה הבינ”ל (IATA) מחייב עמידה בתקן זה לצורכי שינוע.
הסיכונים בהובלת סוללות ליתיום
סוללות ליתיום נחשבות לסיכון בטיחותי אם לא נבדקו כראוי לפני השינוע. סוללות שלא עומדות בתקני UN38.3 עשויות לגרום לאירועים כמו התפוצצות, התחממות יתר, דליפת כימיקלים, או שריפות במהלך השינוע. אירועים כאלה עלולים לגרום לנזק למטענים אחרים, לסיכון בטיחותי למטוסי נוסעים, ולעיתים אף לפגיעות בנוסעים.
מדוע לבחור בחרמון מעבדות?
מומחיות וניסיון: אנחנו מעבדה מוסמכת עם צוות מומחים בעל ניסיון רב בבדיקות סוללות ליתיום לפי תקנים בינלאומיים.
הסמכה מלאה: כל תהליך הבדיקה שלנו מבוצע על פי התקנים הנדרשים, כולל תקן
IEC/EN/UL 62133-2 ותקן UN38.3, כדי להבטיח שתהליך הייצור שלך עומד בדרישות הבטיחות הבינלאומיות.
תוצאות אמינות ומדויקות: אנו מבטיחים תוצאות אמינות ואובייקטיביות שיסייעו לך להוציא לשוק מוצר איכותי ובטוח.
מענה מקצועי: אנו מספקים ייעוץ מקצועי והכוונה לאורך כל תהליך הבדיקות, כולל הפקת דוחות מפורטים ותעודות CB.
לקבלת מידע נוסף על שירותי הבדיקות שלנו או על מנת לקבוע פגישה עם צוות המומחים שלנו, אל תהסס לפנות אלינו בכל אחת מהדרכים המקובלות. אנו כאן כדי להבטיח שהסוללות שלך יעמדו בכל דרישות הבטיחות ולהבטיח את הצלחתן בשוק.