Specifications

Analog PSTN 2 / 4-wire TE and CO (opt. ALG)ETSI ES 203 021, TBR 21,
EG 201 121,
EN 301 437 (Europe)
TBR 15, 17 (Europe) (5)
FCC Part 68, TIA-968-A (USA)
CS-03 Part I (Canada)
AS/ACIF S002, S003 (Australia)
PTC 200, 220 (New Zealand)
5 YD/T 514 (China)
HKTA 2011 (Hong Kong)
PSTN01 (Taiwan)
JATE, Analog Terminals (Japan)
IDA TS PSTN 1 (Singapore)
MoC 023/96 (Israel)
DPT-TE-001 (South Africa) (5)
CNC-ST2-44-01 (Argentina) (5)
Decree No. 392 (Brazil) (5)
NET 001/92 (Brazil) (5)
ANSI/TIA/EIA-464-C (USA) (5)
CID SMS (opt. CID SMS)ETSI EN 300 659-1 V1.3.1, ETSI EN 300 659-2 V1.3.1,
ETSI EN 300 659-3 V1.3.1, ETSI ES 201 912 V1.1.1
ETSI 300 648, ETSI EN 300 778-1,2 V1.2.1
xDSL: ADSL, ADSL2, ADSL2+, HDSL,
HDSL2, HDSL4, SHDSL, SDSL,
VDSL CPE and CO (opt. DSL)
FCC Part 68, TIA-968-A 5 (USA) (ADSL)
IDA TS ADSL1 (5)
CS-03 Part VIII (Canada xDSL)
AS/ACIF S043.2,
S041 (Australia xDSL)
ITU-T G.992.1 (5),
G.992.3 (5), G.992.5 (5),
G.993.1 5 (xDSL) (2)
ITU G.991.2 (SHDSL) (2,5)
ETSI TS 101 388 (ADSL) (2,5)
ETSI TS 101 270-1 1 (VDSL) (2,5)
Taiwan ADSL 01 (5)
1.544 Mbps interface (opt. T1)FCC Part 68, TIA-968-A (USA)
CS-03, Part II and VI (Canada)
JATE, Digital Terminals (Japan)
HKTA 2017 (Hong Kong)
ITU-T G.703 (International)
ITU-T G.824 jitter and wander (international)
ANSI/TIA/EIA-464-C (5) (USA)
2.048 Mbps interface (opt. E1)ISDN PRI: TBR 4 (Europe) –
Layers 1, 2, 3 (3)
TBR 12, 13 (Europe)
AS/ACIF S003, S016, S038 (Australia)
TNA 134 (ISDN L3 New Zealand)
JATE, Digital Terminals (Japan)
NOM – 152 (Mexico) (5)
ITU-T G.703 (international)
ITU-T G.823 jitter and wander (international)
Acoustic and telephonometry testing of handset and hands-free telephones (opt. ACU , HATS , HATS 2)
Analog telephones (opt. ALG )TBR-38 (Europe)
FCC Part 68 (USA),
TIA-968-A
AS/ACIF S004 (Australia)
GB/T 15279-94 (China) (5)
ITU-T P.340, P.313 (International)
TIA/EIA – 470.120-C (USA) (5)
VoIP and Digital telephones (opt. VoIP , DECT , WiFI , Bluetooth)TIA/EIA-810A (USA)
TIA/EIA-810B (USA)
TIA/EIA-920 (USA)
TIA/EIA-920-A (USA)
TBR 10 (Europe) (5)
ETSI ES 202 737 (Europe) (5)
ETSI ES 202 738 (Europe) (5)
ETSI ES 202 739 (Europe) (5)
ETSI ES 202 740 (Europe) (5)
Cellular telephones (Cellular opt.)3GPP TS 26.131,
3GPP TS 26.132 (International)
3GPP TS 51.010-1 (GSM 11.10) (International)
3GPP2 C.S0056-0 / TIA-1042 (International)
ETSI EN 300 903 (GSM 03.50) (Europe)
ITU-T P.342, P.360 (International)
Hearing Aid Compatibility (opt. HAC)FCC 68.316 and 68.317 HAC (USA)
SIP protocol testing (opt. SIP)ETSI TS 102.027 / RFC 3261
Voice Quality Testing (opt. VQT )ITU-T P.862, P.862.1 (International)

Notes:

  1. Excluding: High voltage (surges, overvoltage protection, leakage current), EMC, safety, environmental tests
  2. See xDSL electrical characteristics and transmit power below, for supported tests
  3. opt. L23 is required for Layer 2 and 3 testing
  4. Contact Hermon Laboratories for other available standards
  5. Some standards are optional – please consult Hermon Laboratories
Analog PSTNAutomatic dialing Automatically repeated call attempts Clearing of automatic calls DC characteristics in on-hook and off-hook states: Voltage vs current, resistance vs current, DC current DC Resistance DTMF, MF, MFC Signaling Received digits, digit waveform vs time / frequency, low & high group voltage / power / frequency, twist, tone / pause / cycle duration with statistics, noise, rise & fall time, DTMF, MF, MFC digits generation with programmable frequency, level and duration Hazardous voltage limitations Impedance in on-hook and off-hook states Impedance – IZI, Phase, Resistance, Reactance, Inductance, Capacitance, Return loss impulse noise Insertion loss (Series TE) Intentional operational paths to ground Intentional protective paths to ground Line liberation through power failure Longitudinal conversion loss Loop current characteristics Loop interruption tolerance Output signal balance Progress tone detection and generation with programmable level, frequency, duration, cadence and timingPulse signaling Received digits, voltage/current vs time and voltage vs current plots, make/break levels and duration, resistance, inter-digit pause, pulse ratio – statistics Pulse digits generation with programmable duration and N / N+1 encoding Relative frequency response R.E.N determination Return loss Ring detection and generation with programmable level, frequency, duration, cadence and timing Ringing impedance Ringing signal overload Series DC Resistance (Series TE) Signaling interference Spectrum Analysis Signal and Noise level measurements vs time and frequency Instantaneous, mean, RMS voltage and power – ­ broadband and narrowband with various BW and filters, psophometric noise, impulsive noise – statistics TIMS and Through Transmission – ­ Narrowband and Broadband tests (see 1.544 Mbps and 2.048 Mbps TIMS and PCM tests) Through Transmission – ­ SF cuttoff Transient after change to the opposite polarity Transient response Transmission delay
Line, CO and TE simulationVariable DC loop feed voltage and current limit Variable series resistance, complex line length and terminations Call simulation and analysis of FXS, FXO loop-start interfaces including: Generation, detection and measurements of DTMF, MF, MFC signals and numbers with variable levels, frequency, duration and timing Pulse signaling with variable duration and N / N+1 encoding Progress tones (dial, progress, busy, ringing tones, etc) and Rings with variable level, frequency, cadence and timing Off-hook, on-hook, wink, flash, polarity reversal and ground-start states with variable characteristicsPlayback and recording of .wav files Programmable received event masks and if / then / goto conditions for flow control of the simulation execution and verdict setting Programmable user messages, user verdicts and remote commands (for EUT automatic operation) Pre-defined and user defined database of signals and encodings
CID and SMS testingSMS and CID protocol testing over analog interfaces
Acoustics and TelephonometrySending and Receiving Sensitivity/ frequency response Sending and Receiving Loudness Rating (SLR, ROLR, RLR) Receive Volume Control Sending and Receiving Linearity Sending and Receiving Distortion Sending and Receiving Noise Sidetone and Sidetone Masking Rating (STMR) Sidetone Delay Sending and Receiving DelaySpectrum Analysis with stimulus Sound Pressure Level (SPL) Instability and Howling Echo return loss Terminal weighted coupling loss single talk & double talk (TCLwst & TCLwdt) Acoustic shock protection Voice Quality Testing of handset and hands-free terminals (see Voice Quality Testing)
Hearing Aid CompatibilityMagnetic field intensity Induced voltage frequency response
xDSL electrical characteristics and transmit powerPower spectral density Aggregate total signal power Spectrum Analysis Longitudinal output voltage Transverse balance Longitudinal conversion lossReturn loss Intentional operational paths to ground Intentional protective paths to ground On-hook resistance DC current during ringing Ringing frequency impedance
1544 kbit/s interface (opt. T1)
Tx and Rx connectors……………………………………….. 3-pin Siemens jack (4 mm banana compatible), 100O, balanced
Line Coding………………………………………………………. B8ZS, AMI
Framing Format…………………………………………………. ESF (193E), D4 (193S), Unframed
Clock Input / Output (opt. E1 or T1)
Input / Output 1.544 MHz or 2.048 MHz TTL signal, depending on test configuration
Connectors……………………………………………………… BNC female, unbalanced
2048 kbit/s interface (opt. E1)
Tx and Rx connectors………………………………………. 3-pin Siemens jack (4 mm banana compatible), 120O, balanced BNC female,  75O, unbalanced
Line Coding……………………………………………………… HDB3, AMI
Framing Format………………………………………………… CCS & CRC4, CAS & CRC4, CCS, CAS, Unframed
Protocol Testing……………………………………………….. ISDN PRI Layer 2 and Layer 3 testing according to ETSI TBR 4 (opt. L23)
Analog PSTN interface (opt. ALG )
Two Analog 2-wire test ports with loop simulation and programmable ring and progress tone generator (CH A, CH B), External termination (Zref) input, External series (feed) resistance input, Speaker for audio monitoring with volume control (CH A only), Off-hook LED indicator
Connectors …………………………………………………….. 3-pin Siemens jack (4 mm banana compatible)
      Loop simulation (FXS & FXO)
          DC power supply
                Loop feed channel
                  Output Voltage………………………………………………… 0 – 110 Vdc
Current Limit……………………………………………………. 0 – 200 mA
Voltage resolution……………………………………………. 30 mV
Voltage accuracy……………………………………………. 200 mV
Polarity switching time……………………………………… < 0.2 ms
DC resistance test channel
Output voltage………………………………………………… 0 – 500 Vdc
Maximum current…………………………………………….. 10 mA
Voltage resolution ………………………………………….. 0.2 V
Voltage accuracy ………………………………………….. 0.4 V
Series resistance
                  Range ………………………………………………………….. 0 – 300 kO or external
Resolution …………………………………………………….. 5O or 10O depending on test configuration
Terminations (Zref) ………………………………………… Variable according to the supported standards, external or software simulated
R1 + (R2 II C2) for measured impedance calculation
Artificial line network ……………………………………… Variable according to the supported standards
Ring generator
Programmable frequency, level, on/off duration, cadence
Output voltage ……………………………………………… 0 – 150 Vrms
Output power……………………………………………….. 22.5 W maximum
Frequency……………………………………………………. 10 – 100 Hz
Voltage resolution …………………………………………. 0.2 V
Voltage accuracy………………………………………….. 0.5 V
Progress tone generator
Programmable frequency, level, on/off duration, cadence
Acoustic interface (opt. ACU -INT )
Audio frequency generator output
Connector ……………………………………………………………….. BNC female
Connects to external mouth simulator
Measurement input
Connector ……………………………………………………………….. LEMO type female (7-pin)
Frequency range ……………………………………………………… 10 Hz – 24 kHz
Connects to external ear simulator
Second measurement input (opt. ACU -INT 2)
Connector ……………………………………………………………….. LEMO type female (7-pin)
Connects to external ear simulator
xDSL interface (opt. DSL)
Testing xDSL electrical characteristics and transmit power provided through Analog PSTN and 1544 kbit/s interfaces.
VoIP Ethernet test interface (opt. VoIP )
(One of the Ethernet LAN ports. See below) Signaling protocols………………………………………………………… SIP, H.323 Codecs………………………………………………………………………… G.711, G.722, G.726, G.723, G.729A, GSM FR, iLBC 4
PC interfaces
SVGA output – Connects to external monitor supplied with the system Connector type…………………………………………………………. HD15 female USB – USB 2.0 compatible Connector type…………………………………………………………. Two standard USB ports Serial – RS-232 Connector type…………………………………………………………. DB9 male Parallel Connector type…………………………………………………………. DB25 female Ethernet LAN 10/100 Mbit/s NIC ……………………………………………………… Two ports Connector type…………………………………………………………. RJ-45 female Audio output, Line input, Microphone input Audio interfaces. AC ’97 Audio Codec compatible Connector types………………………………………………………… 3.5 mm stereo jacks Keyboard – Connects to external keyboard Connector type………………………………………………………….. PS/2 female Mouse – Connects to external mouse Connector type………………………………………………………….. PS/2 female
Built-in PC
Intel Core 2 Duo CPU 1 GB RAM Internal 160 GB hard disk Internal flash memory card reader
Display
External 17” LCD color monitor, supplied with the system
External keyboard and mouse
Supplied with the system
Power requirements
100-240 V ACrms, 47 Hz – 63 Hz, 3 A (@ 240 V) to 6 A (@ 100 V) maximum with all options installed and including the external monitor
Environmental Conditions
Temperature
Operating………………………………………………………… 5° C to 45° C
Storage…………………………………………………………… -10° C to 60° C
Relative Humidity
Operating………………………………………………………… 30% to 80%
Storage…………………………………………………………… 10% to 85%
Altitude
Operating………………………………………………………… up to 10,000 feet (3,048 meters)
Storage…………………………………………………………… up to 31,500 feet (9,600 meters)
Regulatory Compliance
EMC………………………………………………………………… EN 61326 FCC Part 15, Class A
Safety…………………………………………………………….. IEC/EN/UL/ 61010-1 / CSA C22.2 No. 61010-1
Dimensions
455 mm (W) x 325 mm (H) x 690 mm (D) 17.9” (W) x 12.8” (H) x 27.2” (D)
without 19” brackets, external monitor, keyboard, mouse, external acoustic option accessories.
Weight
50 kg (110 lb) with all internal options installed without 19” brackets, external monitor, keyboard, mouse, and external options.